.
AGFM

Welcome to American GFM

AGFM

US-30 / US-40 ULTRASONIC CUTTING MACHINES

AGFM US-40
Machine Configurations and Options US-30 US-40
Static cutting table
Static cutting table for Pendular Operation
Conveyorized cutting table
Conveyorized cutting and unloading table for single nesting cutting
Conveyorized cutting and unloading table for continuous nest cut.
Separate conveyorized loading/unloading table to conveyorized machine
Zoned cutting table
Dispensing stand
Single roll dispenser
Four roll dispenser with additional position for vacuum membrane
Cover sheet dispensing stand
Single layer material handling system for:
Static cutting table
Static cutting table for Pendulum Operation
Conveyorized cutting table
Conveyorized cutting and unloading table
Multi-layer material handling system for:
Static cutting table
Static cutting table for Pendulum Operation
Conveyorized cutting table
Conveyorized cutting and unloading table
Cones for unwind position
Thermal Transfer printer
INKJET - Printing w/o head rotation - -
INKJET - Printing in two perpendicular directions - -
INKJET - Infinitely printing in +/- 90degrees - -
Nesting System (Software - PC-Version) NS2/NS2-PC NS2/NS2-PC
Pre-Post-Processor Software ( PC-Version ) AGFM AGFM
Digitizing System
Network to Host System
Remote Support Option
Electrical Power Supply
Power Supply Voltage 50/60Hz 480V or 600V 480V or 600V
Power Supply - Consumption Machine 13kVA 20kVA
Power Supply - Consumption Vacuum 29kVA up to 5m
58kVA up to 10m
29kVA up to 5m
58kVA up to 10m
Compressed Air Supply
Air Supply Pressure min.6bar abs min.6bar abs
Air Supply Volume approx. 10Nm/hr approx. 10Nm/hr
Cutting Technology
Ultrasonic generator GFM GFM
Output power max. 800 Watt max. 800 Watt
Frequency 20000Hz 20000Hz
Noise Level
Machine without vacuum aggregate max.82 dB(A) max.82 dB(A)
Vacuum Option
- 29kVA aggregate max. 82 dB(A) max. 82 dB(A)
- 58kVA aggregate max.87 dB(A) max.87 dB(A)
Machine Dimensions
Cutting area per spec.. per spec..
X-axis stroke per spec.. per spec..
Y-axis stroke 1800mm approx.1800mm
Z-axis stroke 70mm 80mm
C-axis stroke n*360 deg. n*360 deg.
Cutting Speeds
Maximum Cutting speed (X,Y) 0-60m/min 0-60m/min
Acceleration/deceleration (X,Y) Rapid move/Cutting 2.5m/s² / 2.5m/s² 2.5m/s² / 2.5m/s²
Acceleration/deceleration (Z) max. 10m/s max. 2.5m/s
Acceleration/deceleration (C) 900 rad/s 900 rad/s
Dynamic Acceleration Factor
Machine Accuracy
Positioning accuracy in X + Y ±0.1mm ±0.1mm
Repeatability in X + Y ±0.05mm ±0.05mm
Profiling Accuracy ±0.2mm ±0.2mm
Drive System
Motors AC-Servo Motors AC-Servo Motors
Control System
Type AGFM CNC6000 AGFM CNC6000
American GFM Corporation - 1200 Cavalier Blvd - Chesapeake VA 23322 - (757)487-2442