.
AGFM

Welcome to American GFM

AGFM

US-15 - ULTRASONIC CUTTING MACHINE

Static or Conveyorized Tables
AGFM US-15
Machine Configurations and Options US-15 US-20
Static cutting table X X
Static cutting table for Pendular Operation X X
Conveyorized cutting table X X
Conveyorized cutting and unloading table for single nesting cutting X X
Conveyorized cutting and unloading table for continuous nest cut. X X
Separate conveyorized loading/unloading table to conveyorized machine X X
Zoned cutting table X X
Dispensing stand X X
Single roll dispenser X X
Four roll dispenser with additional position for vacuum membrane X X
Cover sheet dispensing stand X X
Single layer material handling system
- static cutting table X X
- static cutting table for Pendulum Operation (loading from one side) X X
- conveyorized Cutting table X X
- conveyorized cutting and unloading table for single nest cutting X X
Multi-layer material handling system
- static cutting table X X
- static cutting table for Pendular Operation (loading from one side) X X
- conveyorized cutting table X X
- conveyorized cutting and unloading table for single nest cutting X X
Cones for unwind position X X
Thermotransfer printer (not carried by machine) X X
INKJET - Print in one direction - -
INKJET - Print in two perpendiculardirections - -
INKJET - Infinitely printing in +/- 90degrees - -
Nesting System (Software - PC-Version) NS2/NS2-PC NS2/NS2-PC
- Pre-Post-Processor Software ( PC-Version ) PP PP
Digitizing System X X
Network to Host System X X
Remote Support Option X X
Electrical Power Supply
Power Supply - Voltage 50/60Hz 480V or 600V 480V or 600V
Power Supply - Consumption Machine 10kVA 10kVA
Power Supply - Consumption Vacuum 29kVA up to 5m
58kVA up to 10m
29kVA up to 5m
58kVA up to 10m
Compressed Air Supply
Air Supply Pressure min.6bar abs min.6bar abs
Air Supply Volume approx. 10Nm/hr approx. 10Nm/hr
Cutting Technology
Ultrasonic generator AGFM AGFM
Output power max. 800 Watt max. 800 Watt
Frequency 20kHz 20kHz
Noise Level
Machine without vacuum aggregate max.78 d (A) ax.78 dB(A)
Vacuum Option
- 29kVA aggregate max. 90 dB(A) max. 90 dB(A)
- 58kVA aggregate max.95 dB(A) max.95 dB(A)
Machine Dimensions
Cutting area per spec.. per spec..
X-axis stroke per spec.. per spec..
Y-axis stroke 1800mm 1800mm
Z-axis stroke 80mm 80mm
C-axis stroke n*360 deg. n*360 deg.
Cutting Speeds
Maximum Cutting speed (X,Y) 0-45m/min 0-60m/min
Acceleration/deceleration (X,Y)
Rapid move Cutting
2.5m/s² 3.5m/s²
Acceleration/deceleration (Z) max. 10m/s max. 10m/s
Acceleration/deceleration (C) 900 rad/s 900 rad/s
Dynamic Acceleration Factor
Machine Accuracy
Positioning accuracy in X + Y ±0.5mm ±0.4mm
Positioning accuracy in X+Y (w. Axis calibration) ±0.4mm ±0.3mm
Repeatability in X + Y ±0.25mm ±0.2mm
Repeatability in X + Y(with Axis calibration) ±0.2mm ±0.15mm
Profiling Accuracy (in Mylar) ±0.8mm ±0.8mm
Profiling Accuracy (with Axis calibration) ±0.5mm ±0.5mm
Drive System
Motors AC-Servo AC-Servo
Control System
Type GFM CNC6000 GFM CNC6000
American GFM Corporation - 1200 Cavalier Blvd - Chesapeake VA 23322 - (757)487-2442