.
AGFM

Welcome to American GFM

AGFM

US-120 ULTRASONIC CUTTING MACHINE

American GFM (AGFM)
Static cutting table
Static cutting table for Pendulum Operation
Conveyorized cutting table
Conveyorized cutting and unloading table
Conveyorized cutting and unloading table for continuous nest cut.
Separate conveyorized loading/unloading table
Zoned cutting table
Dispensing stand
Single roll dispenser
Four roll dispenser with additional position for vacuum membrane
Cover sheet dispensing stand
Single layer material handling system for Ultrasonic Cutting Machines
Static cutting table
Static cutting table for Pendulum Operation
Conveyorized cutting table
Conveyorized cutting and unloading table for single nest cutting
Multi-layer material handling system for Ultrasonic Cutting Machine
Static cutting table
Static cutting table for Pendular Operation (loading from one side)
Conveyorized cutting table
Conveyorized cutting and unloading table for single nest cutting
Cones for unwind position
Thermal Transfer printer
INKJET - Printing in one direction
INKJET - Printing in two perpendicular directions
INKJET - Infinitely printing in +/- 90degrees
Nesting System (Software - PC-Version) NS2/NS2-PC
Pre-Post-Processor Software ( PC-Version ) AGFM
Digitizing System
Network to Host System
Remote Support Option
Electrical Power Supply for Ultrasonic Cutting Machine US-120
Power Supply - Voltage (Machine and Vacuum) 50/60Hz 480V or 600V
Power Supply - Consumption Machine 10kVA
Power Supply - Consumption Vacuum 29kVA up to 5m
58kVA up to 10m
Compressed Air Supply for Ultrasonic Cutting Machine US-120
Air Supply Pressure min. 6bar
Air Supply Volume approx. 10Nm/hr
Cutting Technology for Ultrasonic Cutting Machine US-120
Ultrasonic generator GFM
Output power max. 800 Watt
Frequency 20kHz
Noise Level for Ultrasonic Cutting Machine US-120
Machine without vacuum aggregate max.78 dB(A)
Vacuum Option for Ultrasonic Cutting Machine US-120
- 29kVA aggregate max. 82 dB(A)
- 58kVA aggregate max.87 dB(A)
Machine Dimensions for Ultrasonic Cutting Machine US-120
Cutting area per spec..
X-axis stroke per spec..
Y-axis stroke appr. 1800mm
Z-axis stroke 80mm
C-axis stroke n*360 deg.
Cutting Speeds
Maximum Cutting speed (X,Y) 0-120m/min
Acceleration/deceleration (X,Y) Rapid move/Cutting 6.0m/s² / 6.0m/s²
Acceleration/deceleration (Z) max. 10.0m/s²
Acceleration/deceleration (C) 1500 rad/s²
Machine Accuracy for Ultrasonic Cutting Machine US-120
Positioning accuracy in X + Y ±0.1mm
Repeatability in X + Y ±0.05mm
Profiling Accuracy (in Mylar) ±0.15mm
Drive System for Ultrasonic Cutting Machine US-120
Motors Linear Motors
Control System for Ultrasonic Cutting Machine US-120
Type AGFM CNC6000
Ultrasonic Cutting Machines - American GFM - AGFM - Chesapeake VA 23322 - (757)487-2442