RMS-30 Stack
Router
This versatile conveyorized stack
router is capable of routing stacks of aluminum sheets without requiring
lag screws or rivets to hold the sheets to the base table.
Instead, the material is clamped to inexpensive plywood or cardboard.
Through an innovative clamping and presser foot arrangement the cost and
time of placing and removing rivets or lag screws is eliminated.
The conveyor option allows material to be fed in one end of the machine
and finished parts out the other. No other stack router can match the
increased productivity of the American GFM stack router.
|
|
 High
speed spindle presser foot arrangement with integrated chip
extraction system. |
 Automatic tool changer and tool length check assembly. |
|
Work Envelope (Sheet Size) |
|
| X-Axis (length) | 3700mm |
| Y-Axis (width) | 1600mm |
| Z-Axis (max. stack height) | 12mm |
|
Feedrates |
|
| X-Axis | 0-25m/min. |
| Y-Axis | 0-25m/min. |
| Z-Axis | 0-15m/min. |
|
Position Accuracy: |
|
| X, Y, Z-Axis | +/- 0.05mm |
|
High Speed Spindle |
|
| Power | up to 30 KW |
| Speed | up to 30 000 rpm |
| Tool Holder | HSK 50 or HSK 63 |
|
Tool Changer |
|
| Location | on machine gantry |
| Capacity | 20 pockets |
| Control System: | GFM CNC 6000 |
| Nesting System: | GFM-NS2 |
|
NS2 Nesting System accepts DXF or IGES-Files as geometric input, creates nests with maximum material utilization and allows definition of the routing process specific details (like tag definition etc.) to create part-programs in an optimal way for the routing machine. |
|